LM Dark Diamond™ coated tips enhance precise and non-stick placement of the composite.

The post Plugger 0.7-1.0 mm, cylindrical DD appeared first on LM-Dental.

Unique tip design

• Versatile use
• Provides optimal contact area with Teflon
• Enhances access and precision even in hard-to-reach areas

The post Teflon Packer 1.2 mm appeared first on LM-Dental.

The Enamel Chisel is ideal for use in veneer cases where precise margins as thin as 0.1 mm to 0.6 mm are critical for the success of the restoration. The instrument simplifies the finishing process, requiring less manual dexterity while providing unparalleled precision and control.

Delicate refinement

• Accurate margin trimming for well-defined finishing lines without rotary instruments
• Precision without overpreparation
• Minimally invasive approach
• Versatile use across cases

The post Enamel Chisel 1.2 appeared first on LM-Dental.

LM Dark Diamond™ coated tips enhance precise and non-stick shaping of the material.

Preparation walls are shaped in a single guided movement removing excess resin and leaving perfectly angled, smooth surface. Finishing lines remain clear simplifying subsequent steps. LM™ Build-up Shaper DD strongly reduces the need for post-restoration adjustments, streamlines workflows and enhances the clinical outcomes.

Unique guiding pin tip design

• Allows for precise placement along the finishing line, maintaining an even thickness throughout
• Enables meticulous following of the tooth contour while shaping a uniform, smooth finishing line
• Reduces stress and time spent in using rotary instruments to expose and delineate finishing lines

Tip design with angled wall feature

• Guiding 3° wall design for optimal preparation geometry
• Aids in achieving proper retention and stability of indirect restorations, even in adhesive workflows

The LM™ Build-up Shaper DD is an essential instrument in the LM™ Prepare and Build-up kit.

The post LM™ Build-up Shaper DD appeared first on LM-Dental.

The instrument with two different tip designs simplifies material application and cavity shaping, enabling predictable and high-quality outcomes. LM Dark Diamond™ coated tips allow precise and non-stick placement of the material.

0.5 mm spherical tip

• Precise and controlled material application
• Enables consistent 0.3-0.5 mm resin coating layer thickness for improved adhesive technique
• Helps to prevent the formation of air bubbles

Rounded modeling tip

• Cylindrical-shaped working end for packing and contouring composite
• Shaping of composite resins for smooth transitions and efficient resin condensation
• Creation of internal structures during the tooth build-up
• Supports occlusal build-up morphology

The LM™ Build-up Base DD is an essential instrument in the LM™ Prepare and Build-up kit.

The post LM™ Build-up Base DD appeared first on LM-Dental.

By offering exceptional control and cutting power, the LM™ Build-up Trimmer ensures optimal preparation refinement while preserving sound tooth structure.

Trimming and finishing tip

• Tip aligns seamlessly with the finishing lines created by the LM™ Build-up Shaper DD for precise and controlled refinement
• Sharp cutting edge removes excess resin without damaging surrounding enamel or dentin
• Lateral edges optimized for trimming preparation walls allowing controlled removal of irregularities and undercuts
• Uniform smoothing of walls ensures the preparation geometry is accurate and free of undercuts
• Ideal for hard-to-reach areas ensuring consistent cutting results

The LM™ Build-up Trimmer is an essential instrument in the LM™ Prepare and Build-up kit.

The post LM™ Build-up Trimmer appeared first on LM-Dental.

The Silicone Cutter ensures precise cuts, smooth finishes, and user safety, making it an essential tool for clinicians working with silicone in indirect restorative procedures.

Blade-shaped tip

• Designed meticulously for controlled cuts without slipping or over-cutting
• Offers support and tactile feedback
• Minimizes risk of sharp edges, mistakes, and clinician injuries

Ring-shaped tip

• Refines impressions and creates escape grooves for 2-step impression techniques
• Allows easy removal of material while maintaining control for smooth and accurate results
• Enhances final impression accuracy

The post Silicone Cutter appeared first on LM-Dental.

LM™ Papilla Solleva is a papilla and periosteal instrument designed to separate and elevate the base of the papilla from the interproximal bone.

Features:

• ​Sharp end of the tip enables cutting the connective fibers between the base of the papilla and interproximal bone.
• The sides of the working ends are blunt, preventing the laceration of the gingival margins.
• Mirrored working ends and angulations allow operating from both the mesial and the distal sides of the papilla.
• The length of the working ends enables operating from the labial side and insinuating towards the palatal and lingual sides, and also working from the palatal or lingual side towards the labial side if separation of the base of the complete papilla is necessary.

Suitable, for example, for the following microsurgical procedures:

• Separation the base of the papilla from interproximal bone tissue
• Elevation of the papilla without cutting it
• Tunneling of the papilla

The post LM™ Papilla Solleva appeared first on LM-Dental.

LM™ Papilla Remota is a periosteal and micro papilla elevator for elevating interdental papilla, and for remote vertical incisions.

Features:

• Two different tip designs that are complementary in surgical procedures.
• The shorter “spoon-shaped” tip without cutting edges for elevating the interdental papilla.​
• The longer flat working end for full-thickness separation to be used from apical and lateral areas through remote incisions.
• Provides great  tissue release.

 

Suitable, for example, for the following microsurgical procedures:

• Elevation and coronal displacement of the soft tissue through a remote incision
• Elevation of the interdental papilla in minimally invasive flapless surgeries
• Elimination of adhesions and frenulum

The post LM™ Papilla Remota appeared first on LM-Dental.

LM™ Coltello is a microsurgical knife for initial incisions, elevating periosteum, and split-thickness separations.

Features:

• A sharp-pointed tip allows for precise contact with the underlying bone.
• Shank angulations and a small working end with an edge provide access to hard-to-reach areas.
• Blade with great cutting power.
• Shank firmness allows the use of pressure needed for elevation of the soft tissue margins.
• Sharp and small mirrored working ends are useful to lift and separate periosteum from the bone.

 

Suitable, for example, for the following microsurgical procedures:

• Inicial incisions
• Elevation of periosteum
• Elimination of adhesions and frenulum
• Working on areas not accessible with fixed-blade scalpels

The post LM™ Coltello appeared first on LM-Dental.

LM™ Orban Redondo is a modified design of the Orban knife for intracrevicular incisions and split-thickness separations.

Features:

• The rounded tip increases safety by minimizing the risk of accidental perforations or unwanted cuts.
• The rounded tip facilitates soft tissue dissection without excessive tension or irregular cuts, which is crucial for tunneling or flap elevation procedures.

Suitable, for example, for the following microsurgical procedures:

• Precise initial incisions
• Full- and split-thickness incisions
• Elimination of adhesions and frenulum
• Tissue resection
• Precise cuts in gingivectomies and gingivoplasties

The post LM™ Orban Redondo appeared first on LM-Dental.

Features

• The point of the blade is sharp for cutting, but the side edges are rounded.
• Flat and very thin design to access hard-to-reach areas.
• Slightly flexible yet rigid blade enabling correct and precise incisions.
• The shank angulations facilitate working at interproximal, vestibular, lingual and palatal levels, allowing parallel access to the dental surface.

Especially suitable for following microsurgical procedures

• Intrasulcular incisions
• Separation of the epithelium and supracrestal gingival connective fibers
• Maintenance of thickness and integrity of marginal tissues
• Separation of the anterior/front part of the papilla during tunneling procedures

The post LM™ Inicia appeared first on LM-Dental.