• A very thin and flexible spatula is designed for transporting and aesthetic modeling the composite.
• The flexible working end sculpts gently and precisely composite layers imitating the natural shapes of the tooth.
• The thin tip of the LM-Arte™ Applica enables the modeling in narrow spaces or against the matrix band.
• Instrument is available with non-stick LM Dark Diamond™ coating.

The post LM-Arte™ Applica appeared first on LM-Dental.

The post Gracey 1/2 appeared first on LM-Dental.

• For premolars and molars
• For buccal, mesial and lingual surfaces

The post Gracey 7/8 appeared first on LM-Dental.

• For molars’ buccal and lingual surfaces using horizontal technique

The post Gracey 9/10 appeared first on LM-Dental.

The post Gracey 11/12 appeared first on LM-Dental.

The post Gracey 13/14 appeared first on LM-Dental.

• For molars’ mesial surfaces
• Blade shank more sharply angulated than in Gracey 11/12 for better access

The post Gracey 15/16 appeared first on LM-Dental.

• Especially fine, flexible and narrow spatula for composite modeling.
• With the LM-Arte™ Applica Twist it is very easy to model in the approximal spaces and marginal ridges in matrix.
• Its bended tips allow reaching to very difficult areas without complicating unnecessarily the work position of the hand.
• Instrument is available with non-stick LM Dark Diamond™ coating.

The post LM-Arte™ Applica Twist appeared first on LM-Dental.

• Especially fine and wide spatula for composite modeling.
• Suits especially for the large tooth surfaces such as buccal surfaces of the incisors.
• The wide spatula end flattens effectively the composite.
• The flexibility, delicacy and sharpness of the tip helps to create precise, aesthetic details.
• The spatula works well for applying the composite from a syringe.
• Instrument is available with non-stick LM Dark Diamond™ coating.

The post LM-Arte™ Modella appeared first on LM-Dental.

• The angulated shanks of the instrument enable unlimited access to all cavities.
• LM-Arte™ Condensa has both a thick and a thin tip which may be used in cavities of different sizes, in both anterior and posterior areas.
• The rounded working end enables a delicate condensation of composite without any risk of sticking.
• Instrument is available with non-stick LM Dark Diamond™ coating

The post LM-Arte™ Condensa appeared first on LM-Dental.

• A modeling instrument with extremely sharp pointed tips.
• The conical tip is perfect for sculpting, with only one instrument, the anatomy of occlusal area of the posterior teeth.
• The fine, probe shaped tip is optimal for modeling fissures and mamelons as well as for layering characterization composites and sealants.
• The flexibility of the LM-Arte™ Fissura enables the gentle probing possible excess bonding resins on the tooth surfaces.
• Instrument is available with non-stick LM Dark Diamond™ coating.

The post LM-Arte™ Fissura appeared first on LM-Dental.

• A unique instrument for horizontal and vertical measuring of thicknesses of composite layers on the anterior restorations.
• After the layering but before the polymerization of the dentine composite, the thinner, conical shaped tip is placed on the natural tooth enamel. This way the unpolymerized composite remaining under the conical tip will be gently modeled, leaving an optimal space (from 0,5 to 0,7 mm) for enamel composite layer.
• The thicker, short tip of the Misura is placed horizontally on the margin of the prepared cavity so that the edge of the tip remains on the original enamel. This determines the right amount of transparent composite to apply on the finishing line.
• As a result, the final aesthetic restoration consists of correctly calibrated opaque and translucent composites, preventing the unpleasant grey effect of the composites.
• Instrument is available with non-stick LM Dark Diamond™ coating.

The post LM-Arte™ Misura appeared first on LM-Dental.