LM™ Papilla Solleva is a papilla and periosteal instrument designed to separate and elevate the base of the papilla from the interproximal bone.

Features:

• ​Sharp end of the tip enables cutting the connective fibers between the base of the papilla and interproximal bone.
• The sides of the working ends are blunt, preventing the laceration of the gingival margins.
• Mirrored working ends and angulations allow operating from both the mesial and the distal sides of the papilla.
• The length of the working ends enables operating from the labial side and insinuating towards the palatal and lingual sides, and also working from the palatal or lingual side towards the labial side if separation of the base of the complete papilla is necessary.

Suitable, for example, for the following microsurgical procedures:

• Separation the base of the papilla from interproximal bone tissue
• Elevation of the papilla without cutting it
• Tunneling of the papilla

The post LM™ Papilla Solleva appeared first on LM-Dental.

LM™ Papilla Remota is a periosteal and micro papilla elevator for elevating interdental papilla, and for remote vertical incisions.

Features:

• Two different tip designs that are complementary in surgical procedures.
• The shorter “spoon-shaped” tip without cutting edges for elevating the interdental papilla.​
• The longer flat working end for full-thickness separation to be used from apical and lateral areas through remote incisions.
• Provides great  tissue release.

 

Suitable, for example, for the following microsurgical procedures:

• Elevation and coronal displacement of the soft tissue through a remote incision
• Elevation of the interdental papilla in minimally invasive flapless surgeries
• Elimination of adhesions and frenulum

The post LM™ Papilla Remota appeared first on LM-Dental.

LM™ Coltello is a microsurgical knife for initial incisions, elevating periosteum, and split-thickness separations.

Features:

• A sharp-pointed tip allows for precise contact with the underlying bone.
• Shank angulations and a small working end with an edge provide access to hard-to-reach areas.
• Blade with great cutting power.
• Shank firmness allows the use of pressure needed for elevation of the soft tissue margins.
• Sharp and small mirrored working ends are useful to lift and separate periosteum from the bone.

 

Suitable, for example, for the following microsurgical procedures:

• Inicial incisions
• Elevation of periosteum
• Elimination of adhesions and frenulum
• Working on areas not accessible with fixed-blade scalpels

The post LM™ Coltello appeared first on LM-Dental.

LM™ Orban Redondo is a modified design of the Orban knife for intracrevicular incisions and split-thickness separations.

Features:

• The rounded tip increases safety by minimizing the risk of accidental perforations or unwanted cuts.
• The rounded tip facilitates soft tissue dissection without excessive tension or irregular cuts, which is crucial for tunneling or flap elevation procedures.

Suitable, for example, for the following microsurgical procedures:

• Precise initial incisions
• Full- and split-thickness incisions
• Elimination of adhesions and frenulum
• Tissue resection
• Precise cuts in gingivectomies and gingivoplasties

The post LM™ Orban Redondo appeared first on LM-Dental.

Features

• The point of the blade is sharp for cutting, but the side edges are rounded.
• Flat and very thin design to access hard-to-reach areas.
• Slightly flexible yet rigid blade enabling correct and precise incisions.
• The shank angulations facilitate working at interproximal, vestibular, lingual and palatal levels, allowing parallel access to the dental surface.

Especially suitable for following microsurgical procedures

• Intrasulcular incisions
• Separation of the epithelium and supracrestal gingival connective fibers
• Maintenance of thickness and integrity of marginal tissues
• Separation of the anterior/front part of the papilla during tunneling procedures

The post LM™ Inicia appeared first on LM-Dental.

LM™ Tunella is a small-sized tunneling knife with two different shank angulations for split-thickness (supra – periosteal) dissections.

Features:

• ​Small-sized working end ensures an entry into the tissues without tensions.
• The small size of the working end allows access to narrow spaces.
• The sharp side of the blade faces the periosteum, while the polished and smooth part is in contact with mucosa, preventing perforations.
• One blade with an angled shank and the other with straight shank for improved access. Having both tips in the same instrument is ergonomic for the surgeon.
• Delicate tips and sharpness facilitate working with less force.

 

Suitable, for example, for the following microsurgical procedures:

• Split-thickness incisions in gingival and mucosal tissues
• Supraperiosteal dissections
• Controlled and precise cuts

The post LM™ Tunella appeared first on LM-Dental.

LM™ Eleva is a micro-sized periosteal elevator for full-thickness (mucoperiosteal) separation.

Features:

• Precise and slightly beveled tip edge for effective separation of periosteum from the bone tissue.
• Absence of cutting edges prevents unwanted damage to soft tissues.
• An additional function is to facilitate the insertion of the graft into the tunnel while it’s pulled with sutures.
• One curved and one straight working end facilitates access to different areas.​
• Shank angulation allows entry more apically if required.

 

Suitable, for example, for the following microsurgical procedures:

• Elevation of periosteum
• Especially useful for minimally invasive microsurgery

The post LM™ Eleva appeared first on LM-Dental.